Industrial Style Bar Table with Cast Iron Pipe Legs

This industrial style bar table measures 110 cm in length, 55 cm in width, and 106 cm in height. The tabletop is made from solid pine wood planks (each 9 cm wide) joined side by side, finished with a dark gray stain and a matte water‑resistant varnish. The surface is lightly distressed with sanded edges, showing natural knots and grain variations. The legs are constructed from black cast iron pipes and fittings (floor flanges, 5 cm diameter pipes, and elbows) arranged in a structural frame. The pipe frame is bolted to the underside of the tabletop with pre‑drilled holes. The total weight of the table is 22 kg due to the cast iron components. The maximum load capacity is 45 kg evenly distributed. A lower cross pipe (35 cm from the floor) serves as a footrest. Each floor flange has a rubber gasket to prevent floor scratches. The table is not foldable or height‑adjustable. Assembly is required: the pipe legs come partially assembled as three separate sub‑assemblies; the user must attach each sub‑assembly to the tabletop using screws, then connect the footrest pipe. A wrench and Allen key are included. Estimated assembly time is 25 minutes. This table is intended for indoor use in home bars, loft apartments, or man caves. Not suitable for outdoor use as cast iron may rust if exposed to moisture. The pine top is relatively soft; avoid dragging heavy or sharp objects. Clean with a slightly damp cloth and dry thoroughly. The dark gray stain may fade with prolonged sunlight exposure. The pipe joints are threaded but should be hand‑tightened only; do not overtighten.